The safety class is the first thing to look at, because it determines which risks your shoe protects you against. For construction, that is usually S3; for dry indoor jobs, S1P or S2 is often enough.
The codes look complicated, but they come down to a few basic rules. Every safety shoe has toe protection against falling objects. After that, what comes with it differs per class:
Do you work outdoors, on scaffolding, or in a shell construction where it rains and material is lying everywhere? Then choose S3 safety shoes. If you mostly work in tidy homes or offices installing fixtures, you can go lighter. Always check what the employer or client requires, though, because some construction sites demand at least S3.
All three materials protect your toes according to the same standard; the difference lies in weight, temperature behavior, and price. Steel toe caps are the heaviest and cheapest, while composite and aluminum are lighter.
Steel is a proven classic. It is sturdy and often the most affordable, but it conducts cold and heat. In a cold winter building pit, you will notice it. Composite is made of plastic or fiberglass, does not conduct cold, contains no metal, and weighs less. That is pleasant if you walk all day or often have to pass through a metal detector. Aluminum falls between steel and composite in weight and is thin, so the toe cap is less bulky.
The question of steel toe or composite is therefore answered by your working day. Do you spend a lot of time outside in the cold or climb a lot of stairs? Then composite wins. Do you want a sturdy shoe at a sharp price and are you not bothered much by weight? Then steel is perfectly fine.
A good sole prevents slipping, which is one of the most common causes of accidents on construction sites. Look at the material, the depth of the tread, and the surface you work on.
On loose ground, gravel, or mud, you need a deeper, coarser lugged sole that cleans itself. On smooth floors such as concrete, tiles, or polished surfaces, a sole with more contact area works better. Also look for the SRC label, which indicates that the sole has been tested for slip resistance on both ceramic tiles and steel with glycerine.
Does the sole also need to resist oil, grease, or heat? Then look for an oil- and fuel-resistant sole, and possibly heat resistance up to 300 degrees for welding or asphalt work. A dual-density polyurethane sole is light and springy, while rubber is more wear-resistant and keeps its grip longer in dirt and moisture.
The best safety shoe is the shoe you forget you are wearing. A poor fit causes blisters, sore feet, and in the long run back or knee problems.
Ideally, try on shoes at the end of the day, when your feet are at their largest. Bring the socks you also wear at work. Your toes should be able to move freely without your heel slipping. Check these points:
Need extra support? You can often use your own insole, provided the shoe is suitable for it. A breathable lining material also helps against sweaty feet, especially for summer work or in heated spaces. Want to know which brands fit your foot well? Then take a look at, for example, the range from Milwaukee, which also offers workwear and PPE in addition to tools.
With good maintenance of safety shoes, your shoes will last considerably longer. Clean them regularly, let them dry slowly, and replace them as soon as the protection is no longer reliable.
After work, brush dirt and mud off your shoes with a soft brush and lukewarm water. Let wet shoes dry at room temperature and do not put them directly on the heater, as this makes leather brittle. For leather shoes, occasionally use a waterproofing spray or grease to keep the material supple and water-repellent. If possible, also alternate between two pairs so they can air out properly in between.
Replace your shoes when the sole is worn down, the tread is barely visible, the toe protection is damaged, or there are cracks in the leather. Also replace a shoe that has had something heavy dropped on it or that has been punctured, even if it looks intact on the outside. That way, your protection remains what it is supposed to be.
With us you will find everything for protection on construction sites and during assembly work, from S1 to S3 and from steel to composite. We are happy to help you find the right shoe for your workplace and working day.
Still unsure which safety shoe suits you best? Feel free to contact us or drop by the showroom. We are happy to help you think it through.
First ask your employer, site supervisor, or client which minimum safety class applies, because S3 is mandatory on many construction sites. Then make a shortlist based on your work environment (indoors or outdoors, wet or dry, smooth or rough) and only then choose on material, sole, and fit. Not sure? Then go one class higher, because S3 covers most situations.
You often can’t tell from the outside, because the toe protection or puncture-resistant sole can be damaged while the leather looks intact. After a heavy impact, a puncture, or a visibly deformed toe cap, always replace the pair. Also check regularly for a worn tread, loose soles, and cracks in the upper.
Often you can, but only if the shoe is suitable for it and the insole replaces the original insole rather than going on top of it. Otherwise the shoe becomes too tight and the protection may be reduced. Check the product description to see whether the shoe is ‘suitable for orthopedic insoles’, or get advice in the showroom.
Ideally alternate between two pairs so that each pair can air out for a day, and choose shoes with a breathable lining. Wear fresh socks made of breathable material (such as merino wool or technical fibers) and take the insoles out of the shoe after work. You can also use an odor-neutralizing spray or fresh insoles.
Don’t wear new shoes for the whole working day for the first few days, but break them in for a few hours first. Check whether the size and width are right and whether your heel slips; if pressure spots still develop on your instep or ankle, the model is probably not suitable for your foot. Try a different brand or last, because some brands run narrower or wider.
Yes, composite, aluminum, and steel toe caps all meet the same protection standard for impact and compression resistance. The difference lies in weight, temperature conductivity, and the thickness of the toe cap. Composite is therefore extra comfortable in the cold, on long days, and for work where you have to pass through metal detectors.
On average, a pair lasts about 6 to 12 months with intensive daily use, depending on the surface, maintenance, and shoe quality. Look at the condition rather than the time: a worn sole, damaged toe cap, or cracks in the leather are signs to replace immediately. With regular cleaning and waterproofing, you will usually get more out of them.
BMB Techniek B.V.
Crommelinbaan 50
2142 EX Cruquius
Maandag t/m vrijdag: 7.30 – 17.00uur
Zaterdag en zondag: gesloten


© All Right Reserved BMB techniek
Webdesign en bouw door ditisABC