The best metal saw is the one that matches your material, your cutting length and the accuracy you need. There is no all-rounder, but three machines cover almost every job.
Do you mostly saw away from the workshop and don’t want to depend on a power socket? Then a cordless machine is the logical choice. With the Milwaukee metal sawmodels you get plenty of power without a cord, which makes a big difference for roofing or installation work.
Each metal needs its own saw blade, because steel, stainless steel and aluminium behave completely differently under the tooth. A blade that cuts through steel just fine can be blunt within a minute in stainless steel.
For ordinary structural steel, a standard metal blade with a medium tooth spacing works fine. Use a moderate speed and give the saw time to do its work. Forcing it only produces heat.
Cutting stainless steel calls for a harder cutting edge and a low speed. The material work-hardens quickly: if you apply too much pressure or cut too fast, the surface becomes rock hard and your blade jams. Use a blade made specifically for inox and cool with cutting oil where possible.
Cutting aluminium is fast, but the material tends to stick to the teeth. Choose a blade with larger chip space and use some cutting fluid or saw wax. That keeps the cut clean and your blade wears out more slowly.
Tooth pitch is the distance between two teeth, usually expressed in teeth per inch (TPI). A good rule of thumb: make sure at least three teeth are in the material at all times.
In practice, that means you choose a fine tooth pitch for thin sheet metal and a coarser one for thicker or solid material. A tooth that is too coarse on thin material keeps catching and can break off. A tooth that is too fine on thick material fills up with chips and runs hot.
Tooth shape matters too. With a metal saw blade you often find alternating tooth set or a fixed tooth shape with extra reinforcement. For many users, the rule of thumb is simple:
Most blades die from user error, not from wear. With a few habits, you can considerably extend the life of your metal saw blade and your machine.
Too much pressure is mistake number one. You think you’re going faster, but you actually cut more slowly because the teeth can’t cut cleanly and the blade overheats. Let the saw do the work.
A second classic is a loose or poorly clamped workpiece. Vibrations damage the teeth and produce a sloppy cut. Always clamp your material firmly, even with short pieces.
The wrong speed is another common mistake. Too high with stainless steel, and your blade is blunt within a few cuts. Things also go wrong if you keep using a worn blade. A blunt blade requires more force, which puts extra strain on the motor.
A complete set starts with one good machine and a handful of blades that suit your work. You don’t need to have everything, but a few basic items make the difference.
Sawing metal produces sparks, sharp edges and a lot of noise. So always wear glasses, gloves and ear protection. Unsure about the right combination or have a specific job? Get in touch and we’ll gladly help you think it through.
With us you’ll find everything you need to saw metal professionally and safely, from machine to saw blade. With more than 40,000 items and top brands like Milwaukee and Bosch, you don’t have to search multiple shops.
Looking for an affordable addition to your toolbox? Then also take a look at our outlet. Not sure which saw or blade suits your job? Drop by our showroom or ask us online. We’ll gladly help you find the right set.
Start with a machine that suits the job you do most often. For straight cuts in tube, profile and sheet, a metal circular saw is a good choice, and for curves and cut-outs a jigsaw. Always clamp your workpiece firmly, wear safety glasses, gloves and ear protection, and practise first on an offcut to get a feel for speed and pressure.
You can recognise a blunt blade by the extra force needed, a smoky or discoloured cut, lots of burrs, and a saw that starts to vibrate or wander. Teeth that have turned blue also indicate overheating. Replace the blade immediately, because continuing to cut with a blunt blade overloads the motor and gives a sloppy result.
That is not recommended. A blade for steel wears quickly in stainless steel and can clog up with stuck-on material in aluminium. Choose a suitable blade for each type of metal, or a blade explicitly made for multiple materials, and always check the markings on the packaging.
Stop immediately, switch off the machine and wait until the blade has stopped before moving the workpiece. Jamming is usually caused by a tooth pitch that is too coarse for thin material, too much pressure, or a poorly clamped workpiece. Check the tooth pitch (at least three teeth in the material at the same time), clamp the workpiece better and start cutting again with less pressure.
A cordless machine is ideal when you work on location, such as roofing, installation work or on the building site, where a power socket or extension cord is a hassle. For long, heavy sawing sessions in the workshop, a corded model can be more convenient. With a cordless model, make sure you have a second battery so you can keep working.
Use a blade with the right tooth pitch, cut with moderate pressure and make sure the workpiece is firmly clamped. Afterwards, remove any remaining burrs with a file, deburring tool or a fine sanding flap. Wear gloves when deburring, because cut edges are often very sharp.
For stainless steel and aluminium it is strongly recommended: cutting oil cools and lubricates stainless steel, while saw wax or cutting fluid prevents aluminium from sticking to the teeth. With thin steel you can often do without, but for a longer blade life and a cleaner cut it pays off there too. Apply the product before you start sawing and top it up during longer cuts.
BMB Techniek B.V.
Crommelinbaan 50
2142 EX Cruquius
Maandag t/m vrijdag: 7.30 – 17.00uur
Zaterdag en zondag: gesloten


© All Right Reserved BMB techniek
Webdesign en bouw door ditisABC