You’re facing a job that requires drilling through concrete, stone, or masonry. The question quickly arises: should I use a rotary hammer or a hammer drill? The short answer: a hammer drill is fine for lighter materials like brick and wood, while a rotary hammer is the right choice when you’re tackling heavy-duty work in concrete, natural stone, or reinforced concrete. The two machines look similar, but work fundamentally differently. Below, we explain exactly what the difference is and when you need which machine.
Both the rotary hammer and the hammer drill combine a rotating motion with a hammering action. But the way that impact is generated makes all the difference. In a hammer drill, two serrated discs create the hammering motion: they engage with each other and produce a rapid, vibration-like impact. This works well for softer materials, but delivers less force than you’d want for truly hard material.
A rotary hammer works via a pneumatic system, also known as the SDS system (Slotted Drive System). A piston drives a striker pin that propels the drill bit forward with much greater force. The result: a heavier, more targeted impact that effectively shatters hard material. That’s exactly why rotary hammers are so popular for drilling in concrete and similar heavy-duty work. Most rotary hammers use special SDS-plus or SDS-max drill bits, which cannot be used in a standard hammer drill.
A rotary hammer is the machine you reach for when a hammer drill simply won’t cut it. Think reinforced concrete, hard stone, granite, or thick concrete floors and walls. The pneumatic impact mechanism delivers so much more force that the material is effectively shattered rather than merely drilled.
In addition to drilling, a rotary hammer often features a chisel mode, allowing you to chip or break material without rotation. Ideal for removing tiles, chiseling out joints, or breaking up concrete. Top brands like Milwaukee rotary hammers are known for their power, durability, and ergonomic design, making working with heavy machines considerably more comfortable.
When should you choose a rotary hammer? Here’s an overview:
The hammer drill is the versatile all-rounder for most DIY jobs and lighter professional applications. You can use it on brick, sand-lime brick, wood, metal, and plastic. Switch off the hammer mode and you have a powerful drill for wood or metal.
That’s what makes the hammer drill so attractive: one machine, multiple applications. For hanging a kitchen, installing wall anchors in brick, or drilling holes in metal profiles, this is the ideal machine. Moreover, hammer drills are more compact, lighter, and often less expensive than rotary hammers, making them perfect for anyone who doesn’t deal with heavy concrete on a daily basis.
Do keep in mind that a hammer drill quickly reaches its limits with very hard or thick concrete. The impact force simply isn’t high enough to work efficiently through reinforced concrete. If you use it anyway, you risk overheating the machine and getting poor results.
The choice between a rotary hammer and a hammer drill depends entirely on the material and the intensity of your job. Ask yourself the following questions to quickly arrive at the right choice:
For most home DIYers, a good hammer drill is sufficient. Do you build regularly, work on job sites, or frequently encounter concrete? Then a rotary hammer is the smarter long-term investment.
With us you’ll find both rotary hammers and hammer drills from top brands like Milwaukee, Bosch, and AEG. Whether you’re looking for a light hammer drill for home jobs or a heavy SDS-max rotary hammer for professional applications, our range of more than 40,000 items has the right machine for every situation.
What we do for you:
Still unsure which machine best suits your job? Feel free to contact our team. We’re happy to think along with you and help you make the right choice, without any hassle.
No, SDS-plus and SDS-max drill bits are not compatible with a standard hammer drill. A hammer drill uses a standard chuck in which you clamp regular round or hex shanks, while SDS drill bits have a special locking mechanism that only fits a rotary hammer with the corresponding SDS chuck. If you want to use SDS drill bits, you will need a rotary hammer.
If you try to drill through reinforced concrete with a hammer drill, the machine will quickly overheat because the motor has to work harder than it was designed for. In addition, your drill bits will wear out much faster, you’ll make hardly any progress, and you risk permanently damaging the machine. In the worst case, you’ll also drill at an angle or inaccurately because the impact force is simply too low. Always use a rotary hammer for reinforced concrete.
In most modern buildings (built after approximately 1950) you can assume that load-bearing walls, floors, and columns are made of reinforced concrete. Not sure? Use a metal detector or rebar detector to check whether there are steel rods in the concrete before you start drilling. This not only prevents damage to your machine, but also avoids dangerous situations where you accidentally drill through the reinforcement.
Technically speaking, many rotary hammers can also drill in wood and metal, provided you switch to rotation mode without the hammering action. However, a rotary hammer is not the ideal choice for these materials: the machine is heavier, less maneuverable, and the low RPM is less suitable for precise work in wood or metal. For combined use — both concrete and wood and metal — a good hammer drill with a switchable hammer mode is often the more practical solution.
After each use, clean dust and dirt from the machine, especially around the ventilation openings so the motor stays adequately cooled. For a rotary hammer, regularly apply a light coat of special rotary hammer grease to the SDS chuck to reduce wear. Also periodically check the drill bits for damage and replace them in time — dull bits put extra strain on the machine. Store the machine in a dry place and let it cool down after intensive use before putting it away.
If you only have heavy drilling work once or very occasionally — for example installing a fence or a one-off renovation — renting is often the smartest choice. A professional rotary hammer can easily cost several hundred euros, while you can rent one from most hire companies for a day at a fraction of that price. However, if you regularly encounter concrete in your work or projects, owning your own rotary hammer will quickly pay for itself in time, convenience, and quality.
For intensive and professional use, brands such as Milwaukee, Bosch Professional, and Makita are consistently highly regarded for their durability, power, and ergonomics. Milwaukee is particularly known for its robust build quality and excellent warranty service, while Bosch Professional offers a wide range for both light and heavy applications. The best choice ultimately depends on your specific use case and budget — get advice from a specialist so you don’t pay for more (or less) than you need.
BMB Techniek B.V.
Crommelinbaan 50
2142 EX Cruquius
Maandag t/m vrijdag: 7.30 – 17.00uur
Zaterdag en zondag: gesloten


© All Right Reserved BMB techniek
Webdesign en bouw door ditisABC