Milwaukee Heavy Duty Centre Red Landscape — BMB Techniek
0,00 0

Cart

No products in the cart.

SDS-Plus vs SDS-Max: What Is the Difference?

SDS-Plus and SDS-Max are two different attachment systems for rotary hammers and combination hammers. The short answer: SDS-Plus is suitable for light to medium-duty drilling and demolition work, while SDS-Max is designed for heavy professional use where more power and larger drill diameters are required. The shank of SDS-Max is thicker (18 mm) than that of SDS-Plus (10 mm), which means the systems are not interchangeable. Which system you need depends on the job.

Technical differences between SDS-Plus and SDS-Max

The most visible difference lies in the shank. An SDS-Plus bit has a 10 mm shank, while an SDS-Max bit comes in at 18 mm. That extra thickness is not without reason: a wider shank can transfer more impact energy from the machine to the bit, which directly affects performance in heavy-duty work.

But there is more. The two systems also differ in the number of locking grooves. SDS-Plus has two closed grooves and two open grooves. SDS-Max uses three open grooves, which provides a more secure lock and less play under high load. This makes SDS-Max more robust under demanding conditions, such as prolonged demolition work in concrete or masonry.

  • SDS-Plus shank: 10 mm, 2 closed + 2 open grooves
  • SDS-Max shank: 18 mm, 3 open grooves
  • Impact energy SDS-Plus: typically 2 to 8 joules
  • Impact energy SDS-Max: typically 8 to 30+ joules
  • Machine weight: SDS-Plus lighter and more compact, SDS-Max heavier and more powerful

In short: these are two systems each designed for a different segment. They are not compatible with each other, and that is by design.

When SDS-Plus is the right choice

SDS-Plus is by far the most widely used system, and for good reason. It covers an enormously broad range of applications and fits compact, lightweight rotary hammers that are easy to carry and can be used for long periods without fatigue.

Think of situations such as drilling holes for wall plugs, working with a rotary hammer drill in brick or light concrete, or tackling small demolition jobs. SDS-Plus rotary hammers typically weigh between 2 and 4 kilograms, making them suitable for overhead work or use on a ladder.

SDS-Plus is the right choice if you:

  1. Work with drill diameters up to approximately 26 mm in concrete
  2. Frequently change position or work in hard-to-reach places
  3. Carry out light to medium demolition jobs
  4. Are looking for a versatile machine that also functions as a hammer drill or screwdriver
  5. Value a compact size and lower weight

For most construction professionals and DIY enthusiasts, SDS-Plus is more than enough. The availability of accessories is enormous, and there are excellent machines in this segment from brands such as Milwaukee, Bosch and AEG.

When SDS-Max is the better option

SDS-Max is there for when SDS-Plus simply is not enough. As soon as the job calls for large drill diameters, prolonged demolition work, or drilling through heavily reinforced concrete, SDS-Max is the system you want.

The machines in the SDS-Max segment are larger, heavier, and deliver significantly more impact energy. This translates into faster drilling at large diameters and more striking force during demolition work. Think of breaking up floors, creating large core holes, or working with earth augers and special demolition chisels.

Typical applications for SDS-Max:

  • Drill diameters greater than 26 mm in concrete or stone
  • Intensive and prolonged demolition work
  • Work in heavily reinforced concrete
  • Use of large core bits or special foundation drills
  • Situations where productivity and speed outweigh mobility

The downside is that SDS-Max machines are heavier and more demanding on the user. They are less suitable for fine work or confined spaces. But on the construction site, where power and throughput are what matter, SDS-Max is unbeatable.

Accessories and bits: compatibility per system

An important practical point: SDS-Plus and SDS-Max accessories are not interchangeable. The shanks simply do not fit into each other’s chuck, so always make sure you buy the right bits, chisels, and drills for your system.

Fortunately, the range for both systems is vast. For SDS-Plus you will find drill bits in virtually every diameter, various chisel shapes, core bits, and special application bits. SDS-Max has a slightly smaller but powerful assortment, focused on heavier applications.

When purchasing accessories, keep the following in mind:

  • Always check that the bit has the correct shank size (SDS-Plus or SDS-Max)
  • Choose quality bits from brands such as Carat Tools or Rotec for a longer service life
  • Core bits often have their own adapter; check compatibility in advance
  • Some machines have a quick-change chuck that allows you to use SDS-Plus bits in an SDS-Max machine, but not the other way around

Investing in good accessories always pays off. Cheap bits wear out faster, perform worse, and can even cause damage to your machine or the work surface.

SDS-Plus or SDS-Max: choosing the right system

The choice between SDS-Plus and SDS-Max does not have to be complicated. Simply look at what you do most often and what the heaviest job is that you regularly carry out. That determines which system suits you best.

Start with the question: do you mainly work with drill diameters below 26 mm and are the jobs varied? Then SDS-Plus is the logical choice. Do you structurally deal with heavy concrete, large drill diameters, or intensive demolition work? Then investing in an SDS-Max machine is worthwhile.

Some professionals ultimately choose both systems, with the SDS-Plus machine serving as the daily workhorse and the SDS-Max available for the heavy jobs. That is a smart approach when the work demands it.

How we help you choose the right rotary hammer system

At BMB Techniek we know that the choice between SDS-Plus and SDS-Max is more than a technical comparison. It is about the right machine for your specific situation. That is why we are happy to help you further, whether you are a seasoned construction professional or just starting out.

What we can do for you:

  • Personal advice on which system suits your work
  • An extensive range of rotary hammers from top brands such as Milwaukee, Bosch and AEG
  • A wide selection of compatible accessories and bits for both SDS-Plus and SDS-Max
  • Fast delivery and free shipping within the Netherlands
  • The option to view and compare machines in our showroom in Cruquius

Still unsure or do you have a specific question about rotary hammers or demolition work? Contact us and we will help you right away. Or browse through our full range at your leisure and discover for yourself what suits your job.

Frequently Asked Questions

Can I use SDS-Plus bits in an SDS-Max machine?

Not directly, but some SDS-Max machines come with a quick-change chuck onto which you can mount an SDS-Plus adapter. This means you can in theory use SDS-Plus bits in an SDS-Max machine. The reverse, however, is never possible: SDS-Max bits, due to their wider shank (18 mm), will never fit in an SDS-Plus chuck (10 mm).

What is a realistic budget for a good SDS-Plus or SDS-Max machine?

A solid SDS-Plus rotary hammer from a top brand such as Milwaukee, Bosch or AEG typically costs between €150 and €400, depending on the power and features. For SDS-Max machines the budget is higher: expect to pay €400 to €900 or more for professional models. Cheaper alternatives are available, but for intensive use an investment in quality pays for itself through a longer service life and better performance.

How do I know when my SDS-Plus machine can no longer handle the job and I need to switch to SDS-Max?

Signs that your SDS-Plus machine is reaching its limits are: drilling becomes noticeably slower at larger diameters, the machine heats up quickly, or you find yourself applying too much force to make progress. Also, if you structurally work with drill diameters above 26 mm or carry out intensive demolition work daily, it is time to consider SDS-Max. Occasional heavy work can also be solved by temporarily renting an SDS-Max machine.

Which chisel shape should I choose for demolition work: a pointed or a flat chisel?

That depends on the material and the job. A pointed chisel (spear-point chisel) is ideal for breaking and chipping concrete, stone, and tiles, because the force is concentrated on a single point. A flat chisel is better suited for removing plaster, cutting off tiles, or working along surfaces. For most demolition jobs it is useful to have both shapes available.

Is it worthwhile to invest in a cordless rotary hammer instead of a corded SDS machine?

Cordless rotary hammers in the SDS-Plus segment have improved enormously in recent years and are a fully viable alternative to corded machines for many applications. They offer greater freedom of movement and are ideal at locations without a power outlet. For intensive SDS-Max work, however, corded machines remain preferable due to their consistent power during prolonged use. So consider how mobile you need to be and how intensively you will use the machine.

How do I extend the service life of my SDS bits and chisels?

The most important tip is to never drill without the hammer function in hard materials such as concrete — this wears out the bit extremely quickly and may damage the machine. Cooling is also crucial: let the bit cool down regularly during prolonged use, and never use water as a coolant with electric machines. Store bits and chisels dry and check them regularly for wear; a blunt bit consumes more energy, slows down the work, and puts unnecessary strain on the machine.

Can I also drill into wood or metal with an SDS rotary hammer?

Yes, you can, but only if your machine also has a drill mode without the hammer action. In that mode you can drill into wood or metal with the right bits. Always use a suitable bit for this: a wood twist drill for wood and an HSS metal drill bit for metal. Never use an SDS concrete drill bit in wood or metal, as this gives poor results and damages the bit. Also check whether your machine has a keyless chuck or adapter for round shanks.

    Comments are closed

    Op de hoogte van acties en tools?

    * Required field




    • Winkel informatie

    BMB Techniek B.V.
    Crommelinbaan 50
    2142 EX Cruquius

    KVK: 34077426
    BTW: 807236317.B01

    Maandag t/m vrijdag: 7.30 – 17.00uur
    Zaterdag en zondag: gesloten

    Service

    Word lid van onze WhatsApp Community
    Tips, vragen en aanbiedingen — vakmensen onder elkaar
    Lid worden →

    © All Right Reserved BMB techniek

    2026

    Webdesign en bouw door ditisABC