A rotary hammer can handle quite a lot, but the maximum drill diameter depends on the material, the machine’s power, and the type of drill bit you use. In concrete, a standard compact rotary hammer typically drills holes up to around 26 mm, while heavier SDS-max machines can handle holes up to 52 mm or more. In wood and metal, the limits are different, and the speed matters more than the impact energy. In short: there is no universal answer, but with the right information you can quickly choose the rotary hammer that suits your job.
Rotary hammer capacity varies greatly by material. Concrete, masonry, wood, and metal each place different demands on the machine, and this has a direct impact on the maximum achievable drill diameter.
As a general guide, you can use the following guidelines:
The material therefore plays a role in determining which rotary hammer you need, long before you plug in the machine.
It is not wattage alone, but the combination of power and impact energy that determines how large you can drill. Impact energy is expressed in joules (J) and indicates how much force each hammer blow transfers to the material.
A compact rotary hammer with 2 J of impact energy is perfectly fine for holes up to 26 mm in concrete. If you want to drill structurally larger holes, you need a machine with 4 to 8 J or more. Heavy demolition hammers and combination hammers for SDS-max can reach up to 20 J and beyond, allowing you to create large openings even in reinforced concrete.
Power (watts) plays a supporting role: it keeps the speed stable under load. A machine with high wattage but low impact energy is not necessarily better for large diameters in concrete. So always look at both specifications together, not just the power stated on the packaging.
Even the most powerful rotary hammer underperforms if you use the wrong drill bit. The bit type and shank size form a hard limit on the maximum drill diameter.
The most common shank systems are:
Using an SDS-plus drill bit in an SDS-max machine via an adapter? You will lose impact efficiency and increase the risk of wear. Always use the drill bit that matches the shank size of your machine. And pay attention to the quality of the carbide cutting edge: a cheap drill bit simply will not achieve the maximum capacity of your machine.
With Milwaukee rotary hammers, the shank system is always clearly indicated, so you immediately know which bits are compatible.
Many people choose a rotary hammer based on a single number, while the reality is more nuanced. This leads to frustration on the construction site or at home in the garage.
These are the mistakes we see most often:
In short: making the most of your rotary hammer’s capacity starts with the right combination of machine, drill bit, and material knowledge.
A good choice starts with the question: what am I going to drill, how often, and in what material? Only then do you look at specifications such as power and impact energy.
For occasional home use — think mounting a TV bracket or inserting wall plugs into a concrete wall — a compact SDS-plus rotary hammer with 2 to 3 J of impact energy is more than sufficient. If you drill daily in heavy or reinforced concrete, an SDS-max machine with at least 6 J is a better long-term investment.
Not sure which machine suits your situation? Feel free to contact us for personal advice. We are happy to help you make the right choice without buying more or less machine than you need.
With us you will find not only a wide range of rotary hammers, but also the expertise to make the right choice. Whether you are looking for a compact machine for home use or a heavy-duty SDS-max rotary hammer for professional applications, we have it in stock.
What we can do for you:
Browse our full range in the outlet for competitively priced rotary hammers and accessories, or visit our showroom for hands-on advice. We are ready to help you further.
Yes, most rotary hammers have multiple modes: a hammer drill mode for concrete and stone, and a pure drill mode without impact for wood and metal. It is important to always switch off the hammering action when working with wood and metal, as the hammer blows damage the material and reduce accuracy. Also switch drill bits: use a carbide SDS bit for concrete and an HSS or wood bit for the other materials.
Signs of overloading include abnormal heat build-up in the housing, a clearly decreasing speed under load, unusual vibrations, or a burning smell. If you notice that the machine is struggling to get through the material, there is a good chance you are exceeding the machine’s limits. In that case, switch off immediately, let the machine cool down, and consider a heavier model or a smaller drill bit.
A standard drill bit drills a solid hole by breaking or cutting through the material, while a core bit only cuts out the outer edge of the hole and leaves a core behind. Core bits are ideal for large diameters, such as when drilling through walls for pipes or cable routing, because they offer less resistance and put less strain on the machine. Use a core bit for diameters from approximately 40–50 mm, and for larger diameters in concrete, allow for water cooling to prevent overheating.
A second-hand rotary hammer can be a good choice for occasional use, but for intensive or professional use there are risks. Wear to the impact mechanisms, carbon brushes, and the shank system is not always visible from the outside, but it does have a direct impact on impact energy and drilling performance. Preferably buy second-hand from a reliable supplier who has tested the machine, or consider a refurbished unit from a recognised brand.
Yes, at larger diameters the vibrations, dust, and force on the machine increase considerably. Always wear a dust mask (at least FFP2) and safety goggles, and if possible use a dust extraction adapter on your rotary hammer. Also ensure a firm grip on the machine, because if a core bit gets stuck, the machine can suddenly rotate back, which can lead to injuries. When drilling into walls: always check beforehand whether there are pipes or cables inside the wall.
The lifespan of drill bits depends greatly on the intensity of use and the way you work. Let the drill bit cool down regularly, especially during prolonged use, and if it gets very hot, briefly dip it in cold water. Never use excessive pressure: let the machine’s impact energy do the work and only guide it. Store drill bits in a dry environment and replace them as soon as the carbide cutting edge visibly wears down, as a blunt drill bit puts unnecessary strain on your machine.
If the rotary hammer gets stuck, switch off immediately and do not try to pull the drill bit out by force. Put the machine in reverse mode (if available) and carefully unscrew the bit. With a core bit, you can remove the core with a hammer and chisel. If the bit gets stuck repeatedly, there is a good chance you are hitting reinforcement or a hard stone: in that case, choose a slightly different position or switch to a heavier model with more impact energy.
BMB Techniek B.V.
Crommelinbaan 50
2142 EX Cruquius
Maandag t/m vrijdag: 7.30 – 17.00uur
Zaterdag en zondag: gesloten


© All Right Reserved BMB techniek
Webdesign en bouw door ditisABC