Milwaukee Heavy Duty Centre Red Landscape — BMB Techniek
0,00 0

Cart

No products in the cart.

What Torque Do You Need for Professional Screw Fastening?

Choosing the right torque for screwdriving is simpler than it sounds. As a rule of thumb: the harder the material and the larger the screw, the more torque you need. For light woodwork and small screws, 5 to 15 Nm is sufficient. Metal, harder wood species, and larger fastenings quickly require 20 to 50 Nm or more. The torque setting on your screwdriver or cordless drill determines when the tool stops turning, so you don’t damage the material and the screw doesn’t go in too deep. Below, we explain what you need for each situation.

Torque values by material and application

Not every material responds the same way to a turning screw. Softwood gives way, while steel or hardboard offers much more resistance. The screw torque you need therefore depends directly on what you are fastening and with what.

Here is a practical overview of commonly used materials and their corresponding torque values:

  • Softwood (e.g. spruce, pine): 5 to 15 Nm for small to medium screws
  • Hardwood and chipboard: 15 to 30 Nm, depending on the screw diameter
  • Drywall: low torque, 4 to 8 Nm, to avoid damaging the material
  • Steel and metal: 20 to 60 Nm, sometimes more for thicker constructions
  • Aluminium: work carefully, 10 to 25 Nm to prevent damage
  • Plastic and composite: low torque value, maximum 10 Nm to avoid stripping

The torque value of the drill or screwdriver should always be slightly above the required value, so you have enough reserve. But always start low and work your way up. This prevents snapped screw heads and damaged material.

How torque and speed work together in screwdriving

Torque and speed are two sides of the same coin. A high speed without sufficient torque means the screw turns quickly but doesn’t grip properly. Conversely, too much torque at a low speed can suddenly drive a screw in too deep before you realise it.

In professional screwdriving, the following logic applies: use a higher speed to drive the screw in and switch to a lower speed when the screw is nearly at depth. This keeps you in control of the end result. Many modern cordless screwdrivers have two or more gears that make exactly this possible.

A low gear delivers more torque at fewer RPM, ideal for tightening heavy fastenings. The high gear is suitable for faster work with smaller screws. Always combine this with the correct torque setting on the torque ring of your machine. This way you work efficiently and without damage.

Choosing a torque setting for common jobs

Setting the torque on your screwdriver doesn’t have to be guesswork. With a few basic rules you can go a long way. Most cordless screwdrivers have an adjustment ring with numbers from 1 to 20 or higher. The higher the number, the more torque the machine delivers before the clutch disengages.

Here’s how to tackle the most common jobs:

  1. Attaching drywall: Set the torque to position 3 to 5. The screw should sit just below the surface without tearing through the board.
  2. Screws in softwood constructions: Start at position 6 to 8 and test with a trial screw.
  3. Hardwood floorboards: Position 10 to 14, depending on the screw length and the wood.
  4. Metal screws in steel: Use the drill mode (no torque limitation) or the highest torque setting.
  5. Plexiglass or plastic panels: Low torque, position 2 to 4, to prevent cracking.

Always make a test screw in a scrap piece of material before you start. It takes a minute and saves you a lot of frustration. If you have questions about the right setting, we’re here to help.

Which tools deliver the right torque?

The choice of the right tool largely determines how well you can control the screw torque. Not every device is suitable for every job, and that has everything to do with the maximum torque the tool can deliver and how precisely you can set it.

A standard cordless screwdriver is ideal for light to medium-duty work. These machines have an adjustable torque ring and typically deliver 20 to 40 Nm. For heavier work, you need a combi drill or an impact driver. An impact driver delivers much more torque, sometimes as much as 150 to 300 Nm, but has no adjustable torque limitation. That makes it less suitable for sensitive materials.

For precise and professional screwdriving, a cordless screwdriver with multiple torque settings and gears is the best choice. Brands such as Milwaukee offer models that can be used for both light and heavy work, with a wide torque range and reliable electronic torque limiting.

How BMB Techniek helps with professional screwdriving

At BMB Techniek you’ll find everything you need to set the screw torque correctly and work efficiently. Whether you’re looking for a cordless screwdriver for light assembly work or a powerful machine for heavy constructions, we have it in stock.

What we can do for you:

  • A wide range of cordless screwdrivers, combi drills, and impact drivers from top brands
  • Personal advice from our specialists, both online and in the showroom
  • More than 40,000 items in stock, including screws, bits, and accessories for every material
  • Free shipping in the Netherlands

Not sure which tool best suits your job? Browse our full range or visit us in the showroom in Cruquius. We’re happy to help you make the right choice.

Frequently Asked Questions

What happens if I set the torque too high for my material?

If the torque is set too high, the screw is driven too deep into the material or the screw head snaps off. With sensitive materials such as drywall or plastic, the material can even crack or fray. Always start at a low setting and increase gradually until the screw is at the correct depth.

How do I know if my cordless screwdriver has enough torque for my job?

Check the maximum torque stated on the machine, usually expressed in Nm. For light to medium-duty work, such as wood and drywall, a machine of 20 to 40 Nm is sufficient. For heavy constructions in steel or harder materials, you need a combi drill or impact driver with a higher torque range. Not sure? Our specialists at BMB Techniek will help you choose the right machine.

Do I need to drill a pilot hole before driving screws into harder materials?

Yes, for hardwood, metal, and composite, drilling a pilot hole is strongly recommended. A pilot hole reduces resistance, meaning you need less torque and the risk of cracking or snapping the screw is significantly reduced. Use a drill bit with a diameter slightly smaller than the core of the screw for the best result.

Can I use an impact driver for drywall or plastic?

This is not recommended. An impact driver has no adjustable torque limitation and delivers very high torque values, which will almost certainly damage drywall, plastic, and other sensitive materials. For these types of materials, use a cordless screwdriver with an adjustable torque ring, so you can precisely control how deep the screw goes.

Why does my bit keep slipping out of the screw head while screwing?

This phenomenon is called cam-out and is often caused by too high a speed or the wrong bit size. Make sure the bit fits the screw head exactly, use a lower gear when tightening the screw, and keep the machine straight in line with the screw. Magnetic bits or bits with torsion zones can also help to maintain better grip.

How do I maintain the torque setting on my cordless screwdriver so it stays accurate?

Regularly check that the torque ring turns smoothly and is not damaged. Clean the machine after use and store it in a dry, dust-free place. With intensive use, the torque clutch can wear, causing the setting to become less accurate. In that case, have the machine inspected by an authorised service centre, such as the service partners of BMB Techniek.

What is the difference between torque and impact torque, and why is that relevant for screwdriving?

The maximum torque is the highest force a machine can deliver, while the impact torque specifically applies to impact drivers and describes the force applied with each impact. For regular screwdriving jobs, the maximum torque is the relevant value. The impact torque is particularly important when loosening seized or very tightly fastened connections in metal.

    Comments are closed

    Op de hoogte van acties en tools?

    * Required field




    • Winkel informatie

    BMB Techniek B.V.
    Crommelinbaan 50
    2142 EX Cruquius

    KVK: 34077426
    BTW: 807236317.B01

    Maandag t/m vrijdag: 7.30 – 17.00uur
    Zaterdag en zondag: gesloten

    Service

    Word lid van onze WhatsApp Community
    Tips, vragen en aanbiedingen — vakmensen onder elkaar
    Lid worden →

    © All Right Reserved BMB techniek

    2026

    Webdesign en bouw door ditisABC