Milwaukee Heavy Duty Centre Red Landscape — BMB Techniek
0,00 0

Cart

No products in the cart.

When Are Carbon Brushes, Bearings, or Other Machine Parts Worn Out?

You notice that your drill or angle grinder no longer performs the way it used to. Carbon brushes are worn out when they are shorter than about 6 millimeters, when you see a lot of sparks, or when the machine hesitates and stutters. Bearings give themselves away with a humming or rattling noise, vibrations, and heat around the housing. If you spot those signals in time, you prevent a bit of minor wear from turning into a dead motor. Below you can read how to quickly recognize wear on power tools and when you are better off replacing parts.

Signs of worn carbon brushes

Carbon brushes are worn out when your machine sparks, has less power, cuts out now and then, or no longer wants to start. They are small blocks of carbon that pass current to the rotating armature. That means they wear down by definition, because that is their job.

Watch out for these signals:

  • You see a lot of sparks through the ventilation openings, often orange or blue instead of a faint glimmer
  • The machine runs unevenly or cuts out during work and starts again after a tap
  • You smell a burning odor, a bit like burnt-out electronics
  • The speed and power noticeably drop
  • The machine refuses to start at all, even though the power supply is fine

Want to be certain? Take the brushes out of the holder and measure them. If a brush is shorter than about 6 millimeters or is worn unevenly, replacing it is the wisest option. Always replace them in pairs so the motor keeps running evenly. Replacing carbon brushes is usually a five-minute job with a screwdriver.

Hear and feel a worn bearing

You can recognize a worn bearing by sound, vibration, and heat. A healthy bearing runs quietly and smoothly. As soon as you hear or feel something different, it is time to take a closer look.

A worn bearing often makes a humming, whining, or rattling noise that gets louder when you put load on the machine. You feel extra vibration in the handle, even when no drill bit or disc is mounted. A feeling of play is also a clear indication: grip the spindle or the chuck and gently move it back and forth. If there is play, the bearing is at the end of its life.

Also feel the housing after the machine has been running for a while. If it gets noticeably hot around the bearing, friction is building up. If you do nothing, a failed bearing often damages the shaft or the housing too. A small repair then suddenly becomes a big one.

Wear on other machine parts

Besides carbon brushes and bearings, cords, switches, gears, brush holders, and seals also wear out. Usually this wear announces itself with minor annoyances that are easy to brush off, but that you are better off taking seriously.

Cord, plug, and switch

A cord that is pinched, shows cracks, or gets warm at the plug is a safety risk. The same goes for a switch that sticks, crackles, or sometimes doesn’t respond. Don’t leave such defects for long, because things quickly become dangerous.

Gears and transmission

Do you hear a grinding or ticking noise in the head of your rotary hammer or grinder? Then the gears are at the end of their service life, or the grease has run out. A fresh layer of grease sometimes already solves a lot, but if there is visible damage to the teeth, you need to replace the gears.

Batteries and chargers

With cordless tools, the battery itself wears out too. Does charging take longer and does the battery last less and less time? Then it is worn out. For many brands, such as Milwaukee, separate batteries are available, so you don’t have to replace the tool itself.

Service life and maintenance intervals per part

How long a part lasts depends mainly on how often and how hard you use the machine. There is no fixed rule, but these guidelines will already take you a long way. Treat them as an indication, not a guarantee.

Here is how to handle power tool maintenance sensibly:

  1. Blow the machine clean with compressed air after every heavy use, especially around the ventilation openings
  2. Check carbon brushes every few months with intensive use, once a year with occasional use
  3. Check bearings and spindle for play, noise, and heat as soon as the machine feels different
  4. Lubricate gears according to the manufacturer’s manual
  5. Inspect the cord, plug, and switch before you get started

Professionals who work with their tools every day notice wear sooner than DIYers. So if you use the machine daily, check more often. If you only pick it up a few times a year, you can take it easier. One thing applies to everyone, though: a clean, dry machine lasts longer.

Replace a part or buy a replacement machine

Replacing a part pays off when the repair involves a small component, such as carbon brushes, a bearing, or a cord. A new machine is the smarter choice when the motor itself is defective or when the repair costs come close to the price of a new one.

A simple rule of thumb: does the repair cost more than half the price of a comparable new machine? Then you are better off switching. The same goes for old machines for which parts are no longer available. Is your machine still in great shape and only missing a new part? Then repairing is cheaper and more sustainable.

Torn between repairing and replacing? You don’t have to figure it out alone. Feel free to contact us, we are happy to think along with you.

How BMB Techniek helps with worn machine parts

With us you will find everything you need to keep your tools in top condition or to replace them properly. We carry more than 40,000 items and we know the tools we work with.

  • A wide range of parts and accessories, including batteries, chargers, and accessories from top brands such as Milwaukee, Bosch, AEG, Ryobi, and Mafell
  • Expert advice from people who know what works in practice
  • Ample stock and fast delivery, so you are not without a machine for long
  • Free shipping within the Netherlands
  • A showroom in Cruquius where you can see everything for yourself
  • Affordable alternatives in our outlet if you need a new machine

Is your machine on its last legs, or are you unsure which part you need? Check out bmbshop.nl or drop by our showroom, and together we will find the best solution.

Frequently Asked Questions

How do I know which carbon brushes I need for my machine?

First check your machine’s rating plate for the model and serial number. Then take the old carbon brushes out and compare their dimensions (length, width, and thickness) with the new set. The wrong size can prevent the brush from making good contact with the armature, so the machine will still spark. Not sure? Bring the old pair to the showroom or send us the type number, and we will look up the right set for you.

Can I replace a bearing myself or should I go to a repair technician?

With some experience you can replace a bearing yourself, but it is definitely not a five-minute job. You have to fully disassemble the machine and remove the bearing with a bearing puller or press, without damaging the shaft or housing. Don’t have those tools at home, or unsure about the installation? Then have a repair technician do it, because a badly fitted bearing will wear out again within a short time.

What happens if I keep working with worn carbon brushes?

With heavily worn carbon brushes, the metal holders come into contact with the commutator surface of the armature. This causes scratches and burn marks, and in the worst case the motor burns out. What started as a repair costing a few euros can then grow into a dead motor. So stop as soon as you notice a lot of sparks or loss of power, and check the brushes.

How do I extend the life of my tool's battery?

Don’t charge your battery in a hot or freezing cold room, and don’t leave it completely empty or completely full for months. Store the battery at room temperature with a charge of about 40 to 60 percent if you won’t be using it for a long time. Also use only the original or matching charger from the brand, because the wrong charger can make the cells age faster.

May I still use a machine with a damaged cord?

No, do not use a machine with a pinched, cracked, or warming cord any longer. The risk of an electric shock or fire is too great. Have the cord replaced by someone who can do it properly, or replace it yourself if you are familiar with the connections. A temporary fix with insulating tape is never a safe choice.

What tools do I need to carry out maintenance myself?

For basic maintenance you can get a long way with a set of screwdrivers, a caliper or ruler to measure carbon brushes, compressed air or a brush to remove dust, and the right grease for the gears. For bearings and gears you sometimes need extra tools, such as a bearing puller or circlip pliers. Start with the simple checks and expand your toolbox as you want to do more yourself.

How can I prevent wear with intensive use of my machine?

Use the machine within the power range it is designed for and don’t force it on heavy jobs. After heavy work, let it run unloaded for a minute so it cools down, and blow it clean with compressed air. In addition, use good, sharp bits and discs, because dull accessories put extra load on the motor and bearings.

    Comments are closed

    Op de hoogte van acties en tools?

    * Required field




    • Winkel informatie

    BMB Techniek B.V.
    Crommelinbaan 50
    2142 EX Cruquius

    KVK: 34077426
    BTW: 807236317.B01

    Maandag t/m vrijdag: 7.30 – 17.00uur
    Zaterdag en zondag: gesloten

    Service

    Word lid van onze WhatsApp Community
    Tips, vragen en aanbiedingen — vakmensen onder elkaar
    Lid worden →

    © All Right Reserved BMB techniek

    2026

    Webdesign en bouw door ditisABC