Milwaukee Heavy Duty Centre Red Landscape — BMB Techniek
0,00 0

Cart

No products in the cart.

What Eye Protection Do You Need for Drilling, Sawing, and Grinding?

The eye protection you need depends on what you’re doing. For drilling, a good pair of safety glasses with side protection is usually enough. For sawing, you’re better off choosing safety goggles, and for grinding the safest approach is safety glasses plus a face shield. Whatever you choose, look for the EN 166 marking, because that tells you whether the eyewear can really protect against flying particles. Below we go through the risks for each job so you know exactly what you need.

Eye hazards per task: drilling, sawing, grinding

Every job produces its own kind of flying debris, and you match your eye protection to it. Drilling releases chips and dust, sawing produces sawdust and splinters, and grinding throws off sparks and hot metal particles at considerable speed.

A few examples from practice:

  • Drilling into concrete or stone: fine dust and small bits of stone that fly mostly upward and sideways. Drilling overhead in particular is asking for trouble.
  • Drilling into metal: sharp shavings and sometimes a drill bit that snaps off.
  • Sawing: sawdust, splinters and, with chainsaws or circular saws, pieces of wood that shoot off with force.
  • Grinding and cutting off: glowing sparks and broken-off pieces of the disc. This is by far the hardest job on your eyes.

Note: even if you’re only doing something quickly, a splinter can still end up in your eye. An eye injury happens in an instant, and recovery often takes longer than you think.

Choosing safety glasses, safety goggles or a face shield

For light jobs, safety glasses are enough; with lots of dust or sawdust, safety goggles are a better fit; and when grinding, you wear a face shield over your glasses. Here’s how to match the right type to the job:

Safety glasses

This is the standard choice for drilling and light jobs. Make sure you get glasses with side shields or a wraparound model that fits closely around your eyes, so particles can’t get in from the sides. They’re light, practical and fit under most helmets and ear defenders.

Safety goggles

Safety goggles seal all the way around your eyes, like swimming goggles. They’re perfect for sawing, sanding and dusty workplaces, because no dust or sawdust can get in along the edges. They’re also the better choice if you wear regular glasses, since many safety goggles fit over them.

Face shield

When grinding, cutting off and doing work that throws off lots of sparks, a face shield protects your entire face. Always wear your glasses underneath, because a shield alone doesn’t keep particles out of the corners of your eyes. Think of it as a second layer of safety, not a replacement for your glasses.

Looking for a good pair of glasses or a good shield for the job ahead of you? Feel free to contact us, and we’ll be happy to help you choose.

Understanding EN 166 markings and protection classes

The EN 166 standard is the European standard for eye protection, and the letters and numbers on your glasses tell you exactly what they protect against. If you don’t see any marking, you don’t know what you’re wearing, and you’re better off leaving them on the shelf.

On the frame and the lens you’ll usually find the following information:

  1. Manufacturer code: who made the glasses.
  2. Optical class (1, 2 or 3): class 1 is intended for continuous work, so it’s also suitable for long working days.
  3. Mechanical strength: S stands for increased strength, F for low-energy impact, B for medium-energy impact and A for high-energy impact.
  4. Field-of-use number: 3 for liquid droplets, 4 for coarse dust, 5 for gas and fine dust, 8 for electric arc, 9 for molten metal and hot solid particles.
  5. Additional codes: K for scratch-resistant and N for anti-fog.

For drilling and sawing, pay particular attention to the strength letter (at least F) and the 4 for coarse dust. For grinding, look for a higher strength class, such as B, and the 9 for hot particles. If there’s a T after the strength letter, it also applies at extreme temperatures.

Weighing lens material, coating and wearing comfort

Polycarbonate is the best lens material for most jobs, because it’s light and impact-resistant. In addition, the coating and wearing comfort determine whether you’ll actually keep the glasses on all day.

What to look out for:

  • Lens material: polycarbonate is impact-resistant and light, but scratches more easily than glass. A scratch-resistant coating (K) largely solves that.
  • Anti-fog (N): indispensable if you often work in warm or humid environments, or with a dust mask.
  • Tint: clear for indoors, grey or tinted for work in bright sunlight. For welding or working with intense light you need special filters.
  • Fit and weight: glasses that pinch or slip will end up coming off by themselves. Choose a model with an adjustable nose bridge and temples.

Good brands make the difference in comfort and optical quality. For example, in the range from Milwaukee you’ll find glasses designed for a full working day, with attention to fit, scratch resistance and anti-fog.

Common mistakes when wearing eye protection

Most eye injuries don’t happen because there are no glasses, but because the glasses don’t fit properly, aren’t suitable or aren’t worn. These are the classics:

  • Using regular glasses as safety glasses. Reading glasses or sunglasses don’t stop particles and can even shatter.
  • Wearing only a face shield. Without glasses underneath, sparks or chips can get in from the side or from below.
  • Continuing to use glasses with deep scratches. That causes poor vision and weakens the lens.
  • Pushing the glasses up onto your forehead. Right at the moment you need them, they’re just not in front of your eyes.
  • Not taking your other PPE into account. Glasses that don’t fit with your helmet, ear defenders or dust mask leave gaps.

Also store your eye protection in a case or in a clean place, and clean the lens with a soft cloth. Replace it as soon as it’s damaged, because new glasses cost a fraction of what an eye injury costs.

How BMB Techniek helps with eye protection

With more than 40,000 items and a complete range of PPE, we make sure you find the right protection for every job. Whether you’re going to drill, saw or grind: we’re happy to help you choose.

  • Safety glasses, safety goggles and face shields from top brands, all with EN 166 marking.
  • Expert advice, even if you’re unsure between different types or classes.
  • A complete PPE range, so also gloves, ear defenders and dust masks that fit well with your glasses.
  • Free shipping in the Netherlands and fast delivery from our extensive stock.
  • A showroom in Cruquius, where you can try on glasses before you choose.

Want sharp prices without compromising on quality? Also take a look at our outlet for attractive deals. Drop by the showroom or browse the webshop at bmbshop.nl, and choose the eye protection that suits your job.

Frequently Asked Questions

Can I wear my regular glasses under safety glasses or safety goggles?

Yes, that’s possible with safety goggles specially designed to fit over regular glasses (so-called over-glasses). If you wear normal glasses, they aren’t eye protection themselves, so always wear suitable safety glasses or safety goggles over them. If you’d like more comfort, choose prescription safety glasses, which you can have made through a specialist optician or PPE supplier.

How often should I replace my safety glasses?

There’s no fixed replacement date, but replace your glasses as soon as they’re visibly damaged: deep scratches, cracks, a loose frame or a lens that no longer sits firmly. Replacement is also wise after a heavy blow or the impact of a particle, because the lens may have been weakened. With daily use, that often means every few months to a year in practice.

What should I do if something still gets in my eye?

Never rub your eye and don’t try to remove an embedded object yourself. Gently rinse the eye with clean water or an eyewash bottle, and go straight to your GP or the emergency department in case of metal particles, sparks, chemicals or persistent pain. That’s why you should always keep an eyewash bottle within reach at your workplace or in your workshop.

How do I clean my safety glasses properly without damaging the coating?

First rinse off coarse dust and sawdust with water, so you don’t rub dust particles across the lens. Then clean with a soft microfibre cloth and a mild dish soap or special lens cleaner, and let the glasses air dry or pat them dry. Don’t use rough cloths, kitchen paper or aggressive cleaning products, because they damage the scratch-resistant and anti-fog coating.

How do I prevent my glasses from fogging up with a dust mask or ear defenders?

Choose glasses with the N marking (anti-fog) and make sure your dust mask fits well against your nose bridge, so your warm breath doesn’t blow up onto the lens. Safety goggles with ventilation openings also help, as does an anti-fog wipe or spray for extra protection. Also check that the temples of your glasses combine well with your ear defenders, so no gaps form.

What eye protection do I need when chopping or cutting tiles and concrete?

Work with an angle grinder or tile saw releases a lot of fine dust and stone grit, so safety goggles with an EN 166 marking (at least F and field-of-use code 4 or 5) are the best basis here. When cutting off or when there are lots of sparks, use a face shield on top. Combine this with a well-fitting dust mask, because fine stone dust is also bad for your lungs.

How do I check whether my glasses really meet the EN 166 standard?

Look for the marking on both the frame and the lens: you should be able to find the manufacturer code, the optical class and a strength letter (such as F or B), and genuine protection also carries the CE mark. If the marking is missing on either part, the glasses are not fully certified. So buy from a reliable supplier and, if in doubt, ask for the product specifications or advice.

    Comments are closed

    Op de hoogte van acties en tools?

    * Required field




    • Winkel informatie

    BMB Techniek B.V.
    Crommelinbaan 50
    2142 EX Cruquius

    KVK: 34077426
    BTW: 807236317.B01

    Maandag t/m vrijdag: 7.30 – 17.00uur
    Zaterdag en zondag: gesloten

    Service

    Word lid van onze WhatsApp Community
    Tips, vragen en aanbiedingen — vakmensen onder elkaar
    Lid worden →

    © All Right Reserved BMB techniek

    2026

    Webdesign en bouw door ditisABC