Looking to buy a Milwaukee rotary hammer for concrete or masonry? The right choice depends on two things: the intensity of the work and the environment in which you’re working. For light to medium drilling in concrete or masonry, an SDS-plus model like the Milwaukee M18 FUEL CHX is more than sufficient. For heavy demolition work or drilling large holes in reinforced concrete, an SDS-max rotary hammer is the better choice. Below, we walk you through what to look for step by step.
When drilling in concrete or masonry, everything comes down to impact energy, expressed in joules. The higher that number, the harder the machine drives the bit into the material. For drilling anchor holes in masonry, 1.5 to 2 joules is already sufficient. But if you want to set anchors in reinforced concrete or drill holes with a diameter of more than 20 mm, you’ll quickly need 3 to 5 joules or more.
Torque determines how much resistance the rotary hammer can handle without stalling. High torque is important when working with tough materials or larger drill diameters. Milwaukee combines high impact energy with strong torque in its rotary hammers, so you need to apply less force and get through material faster. That saves not only time, but also fatigue at the end of a long workday.
The chuck system of the bit largely determines which machine you need. SDS-plus is the standard for light to medium work; SDS-max is built for heavy-duty applications.
Here’s the difference at a glance:
For most tradespeople on the job site, an SDS-plus rotary hammer is the everyday workhorse. An SDS-max model is more of a specialized machine that you deploy when the job truly demands it.
The choice between cordless and corded is less black and white today than it used to be. Milwaukee M18 cordless rotary hammers now deliver performance that was previously only possible with a corded model. Still, there are situations where one works better than the other.
Advantages of the Milwaukee M18 cordless rotary hammer:
A corded model has the advantage that you never stop work due to a dead battery. For intensive, prolonged use at a fixed location, that can be decisive. But for most construction workers and installers, the freedom of a cordless rotary hammer is now the standard. The Milwaukee M18 range offers a wide selection.
A good rotary hammer does more than just drill. The chisel function makes it possible to remove tiles, break open joints, or carry out small demolition jobs without bringing a separate machine.
Milwaukee rotary hammers typically offer three operating modes:
On many Milwaukee models you can also lock the chisel position, which is handy for repetitive movements. This prevents you from having to readjust constantly and increases efficiency during demolition work. Always check when purchasing whether the model you are considering supports all three modes, as not every entry-level model has a full chisel function.
The most common mistake is buying a machine that is too light for the work you actually do. Many people choose based on price, while impact energy and the chuck system are far more decisive for the result.
Other mistakes we often see:
A rotary hammer is an investment. Take the time to determine what you really need, and choose something with a little more power rather than just barely enough. That pays off in speed, comfort, and the lifespan of your machine.
At BMB Techniek we carry an extensive range of Milwaukee rotary hammers, from compact SDS-plus models for daily use to heavy SDS-max machines for demolition and large-diameter drilling. We are happy to help you make the right choice, whether you are a professional who works on the job site every day or someone who wants to tackle a serious project at home.
This is what we can do for you:
Not sure yet which rotary hammer suits your situation? Contact us or visit our showroom. We are happy to think along with you, without any sales pitch.
For a DIYer who occasionally drills anchor holes or does light work in masonry, a compact Milwaukee M18 SDS-plus rotary hammer such as the M18 BH is more than sufficient. Choose a model with at least 2 joules of impact energy and three operating modes, so you can also use the chisel function when needed. Also invest in a good set of SDS-plus bits specifically for concrete, because with the wrong drill bit you will never get the best out of your machine.
For drilling anchor holes in reinforced concrete you need at least 3 to 4 joules of impact energy, especially when working with anchor diameters of 12 mm or more. For larger anchors or extra-hard concrete, it is better to look for a model with 5 joules or more, such as an SDS-max rotary hammer. Less impact energy than needed means the machine has to work harder, which comes at the expense of both the lifespan of your machine and the quality of the drilled hole.
Yes, all Milwaukee M18 batteries are mutually interchangeable within the full M18 platform, including rotary hammers, screwdrivers, circular saws, and other M18 tools. Do keep in mind that a powerful rotary hammer consumes more energy than lighter machines, so with a smaller battery (e.g. 2.0 Ah) you will be able to work for a shorter time. For intensive drilling in concrete we recommend a battery of at least 5.0 Ah to ensure sufficient working time.
If the bit is stuck in the concrete, immediately switch the machine to the chisel function (impact only, without rotation) to vibrate the bit loose without forcing the machine. Never pull hard on the machine while the bit is still rotating, as this can damage the bit or the chuck system. As a preventive measure, it helps to regularly pull the bit back during drilling to clear drill dust, and to always drill with the correct impact energy for the material.
Technically you can use an SDS-max machine for smaller holes, but in practice it is impractical and inefficiënt. SDS-max machines are heavier and larger, making them difficult to handle in hard-to-reach places. Moreover, SDS-max bits are more expensive than SDS-plus bits, and the high power of the machine is simply overkill for light drilling work. Use an SDS-max rotary hammer for what it is intended for: heavy drilling and breaking in reinforced concrete or hard stone.
After each use, clean the chuck system and regularly lubricate the SDS system with a drop of machine oil or special SDS grease to prevent wear. Also periodically check whether the chisels and bits are still sharp, as a dull bit causes unnecessary strain on the machine. Store the rotary hammer in a dry place and protect it from dust and dirt, preferably in the supplied case. For intensive use, Milwaukee recommends having the machine inspected annually by an authorized service center.
Milwaukee FUEL models are equipped with a brushless motor, which works more efficiëntly, produces less heat, and lasts longer than a traditional carbon-brush machine. In practice, this means more impact energy from the same battery, a longer lifespan for the machine, and less maintenance because there are no carbon brushes to replace. For professional daily use, a FUEL model is almost always the better investment, even though the purchase price is slightly higher than a standard Milwaukee rotary hammer.
BMB Techniek B.V.
Crommelinbaan 50
2142 EX Cruquius
Maandag t/m vrijdag: 7.30 – 17.00uur
Zaterdag en zondag: gesloten


© All Right Reserved BMB techniek
Webdesign en bouw door ditisABC